This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.
In this article we’ll look at the different types of sound block plasterboard, the CS-SoundWall 30mm acoustic wall lining system, and the Green glue used to adhere it. Hopefully, we’ve provided you with enough information to make an informed decision about the product.
This article is not intended to be a comprehensive review of the product, but rather a guide to help you choose the best sound block plasterboard for your project.
Sound block plasterboard
Listed below are some of the key benefits of using sound block plasterboard in the construction of your home or office. This type of board is an excellent choice for reducing noise in a variety of applications. It is ideal for areas where noise levels are particularly high, such as offices or classrooms. Its SAA rating ranges from 0 to 1, with each band corresponding to an average sound reduction. Moreover, you can install sound block plasterboard onto existing walls, but you should be very careful when doing so.
Acoustic plasterboards have a dual purpose: to reduce noise from the outside and prevent heat from escaping from the room. They are available in single or double-layer options. For maximum protection, ensure that you use soundproofing materials in all areas, including light switches and sockets. They can help reduce airborne noise by absorbing up to 90 percent of its source. Using sound-blocking plasterboards will help you enjoy the peace of mind that comes with living in a quiet environment.
Adding sound-absorbing plasterboard to a wall is an excellent way to reduce the noise in your home. While the addition of a second layer will improve soundproofing in a small room, adding a third one will have no significant effect. A first layer blocks most of the sounds while the second layer blocks almost nothing. You need to ensure that the thickness of the first layer is sufficient and fits in the cavity properly. Sound-blocking plasterboard is a great option for reducing noise in a bedroom.
If you want to make your house noise-proof, it is vital to understand where the source of noise is. There are several ways to deal with airborne noise, including decoupling the plasterboard studs. A second option will work best for minor airborne noises. You may need to buy acoustic-rated plasterboard if your home is a soundproof zone. You can also install more boards for additional soundproofing.
Green glue
If you’re looking for a new way to improve the soundproofing of your home, you’ve probably already heard of Green Glue. This compound has been proven effective by independent lab tests. This sealant can significantly improve the STC rating of a wide range of construction configurations. In addition to being environmentally friendly, Green Glue also offers low odor and is an affordable solution that adds value and comfort to a home or business.
Before using Green Glue, you should ensure that the walls have been properly caulked. This is an important step in soundproofing, as it will prevent sound from traveling from one wall to the next. Also, be sure to use acoustic putty around electrical outlets, so that sound does not travel through these areas. When using Green Glue, lay a cloth or newspaper on the floor to avoid slipping.
After applying the compound to the walls, you should apply a second layer of drywall and screw it into place. The first layer should not line up with the joints of the second layer, as this will cause air gaps. This way, you’ll have a solid wall with minimal noise. Adding a second layer of drywall to your walls will improve the isolation level even further. A double layer of drywall with Green Glue will give you a STC of 45. Further, you can add a second layer of drywall, fastened to the framing, to further improve sound isolation.
Green Glue is a non-toxic visco-elastic compound that dampens sound vibrations. Sound travels through air and reaches solid objects. When sound hits a solid surface, it transfers energy to the object that makes it vibrate. The vibrations in the sound waves are broken up by the damping material. It can completely eliminate 90 percent of sound transfer. You can use Green Glue between two different building materials, including plasterboard.
Acoustic treatment
If you are looking for acoustic treatment for your wall, consider plasterboard. Plasterboard is a relatively inexpensive, insulating material that can help block sound and improve the design aesthetic of your home. Acoustic treatment for sound block plasterboard is important for a number of reasons, including improved speech intelligibility, a safer living environment, and improved learning. Moreover, it is environmental-friendly and sustainable.
You can buy acoustic plasterboard that is a thicker version of normal plasterboard. Some variants are reinforced with special materials to reduce sound. The heavier the mass, the more noise it can block. Acoustic plasterboard usually has an ivory or brown face, but you can paint it to give it a custom-designed look. You will be able to detect the difference between normal and acoustic plasterboard by tapping it from behind.
You can also add acoustic mineral wool to the walls to reduce the sound energy. Acoustic mineral wool is especially effective for walls and other flexible wall assemblies, as its low-density composition prevents the noise from resonating, echoing, and amplifying. AcoustiPutty pads are a versatile solution for sound-blocking plasterboard and flexible wall assemblies. They are a great way to keep your walls soundproof and maintain the separation of your building.
The NRC is a simple way to measure how well acoustic building materials absorb sound. For example, in a concert hall, the NRC value is 500 for acoustic plasterboard, while a sound-blocking ceiling panel is higher for this type of material. For the 2015 NBCC, this value should be greater than 1.0. If you are looking for an acoustic treatment for sound block plasterboard, make sure to choose a plasterboard that meets these standards.
CS-SoundWall 30mm Acoustic Wall Lining System
The CS-SoundWall 30mm is a high-quality acoustic wall lining system that can reduce airborne sound from masonry walls. The lining system is installed directly to a wall, without timber battens. It is ideal for refurbishing existing masonry walls or separating dwellings, and is particularly effective in areas where there is a lot of open space. The CS-SoundWall 30mm is installed directly onto a brick or block wall. Before installation, a roof and windows must be removed, if applicable.
The CS-SoundWall 30mm is installed in a brick-like manner and should be fixed to the wall with minimum gaps. Once installed, acoustic/fire mastic should be applied to all perimeter and abutting joints. Finishing plaster should be applied before decoration. Electrical sockets and switches should be brought through a minimum hole. Karma Acoustic/Fire Putty Pads should be fitted to electrical boxes and switches.
Acoustic treatment reduces echo and reverberation
Acoustic panels are one common way to reduce echoes in a room. These panels are typically found in broadcast studios and music studios. Their egg-crate structure breaks up sound waves as they reflect off the flat surface, reducing echo. They also convert sound energy into heat, reducing reverberation and causing sound waves to dissipate within the foam.
Sound waves travel through the air and come into contact with various surfaces, such as walls and floors. The surface of the room plays a crucial role in reverberation, especially when the sound source is located at a distance from the listener. Surfaces with irregular angles have a greater tendency to reflect sound than flat surfaces. This can lead to a range of problems, from ear fatigue to headaches.
Acoustical panels and other acoustic solutions can help commercial spaces and home offices. You can also install thicker materials, such as carpeting, drapes, and rugs. In addition, thicker furniture and furnishings can absorb sound more effectively than thin pillows or leather. Acoustic treatment does not have to be costly. You can assemble acoustic panels yourself or purchase professional acoustic panels to reduce echo.
In sound-producing spaces, echo and reverberation are common. The first two are characterized by a 0.1 second delay between the original sound and the sound reflected from it. This delay allows the ear to distinguish two distinct sounds after the original sound is no longer present. Reverberation is characterized by the persistence of a sound after the original sound is gone, and this is commonly due to a large number of reflected waves.