This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.
When mounting picture frames or hanging paintings on plaster walls, you may want to use anchors that are made specifically for this purpose. These types of screws usually come with a patented design, which makes them perfect for a variety of mounting situations.
The screws must be inserted into a hole in the plaster, and once inserted, they must be tightened with a screwdriver. The anchor is set when the screw becomes difficult to rotate. To set a new anchor, you can use a wall anchor setting tool.
Plastic anchors
The first step in using plastic anchors for plaster walls is to mark the hole where you want to attach the anchor. Once you have marked the hole, you can insert the plastic wall anchor. Make sure to tighten the screw with a screwdriver. When inserting the anchor, don’t over-tighten it. This could tear the wall and strip the threads of the anchor. The plastic wall anchor must be inserted into the hole just enough to secure the object you want to hang.
If you’re hanging things without a picture rail, screws are best. One 1/4-inch drywall screw is sufficient for hanging light objects. Make sure to use the wood lath behind the wall for additional holding power. To check whether the screw is hitting wood lath, simply move the screw about a half-inch up or down. This will help you see if there is an unattached piece of wood beneath the screw.
To install anchors for plaster walls, first predrill the hole. Then, insert the anchor into the hole and tighten the screw with the help of a screwdriver. When the screw becomes harder to rotate, the anchor is set. You can use a wall anchor setting tool to finish the job. If you’re using a molly bolt, be sure to measure the thickness of the wall first.
While drywall anchors are the most common type of anchor, you can also buy plastic ones for plaster walls. Plastic anchors are generally more expensive than metal ones, so make sure you purchase a high-quality anchor set. You’ll also need a drill bit with a large hole to attach the anchor to the plaster wall. These drill bits are designed to fit a standard screw. When you’ve chosen your anchors, make sure to mark the studs.
When choosing plastic anchors for plaster walls, you should keep in mind that some of these won’t work in cold weather, and you’ll want to opt for a heavy duty anchor. When choosing plastic anchors for plaster walls, you want to err on the side of caution and use only those that have been approved by the manufacturer. If you’re unsure of the right anchor, you can test it on scrap material to be sure it will hold securely.
SnapToggle anchors
SnapToggle anchors for plaster walls are all-metal bolts with metal wings that fold in one direction and expand to brace against the back of plaster. The toggle bolts are a heavy-duty alternative to plastic anchors, as they have a much stronger holding power. When installed correctly, these bolts are sturdy and can hold items of up to 40 pounds. These bolts are available in three different sizes.
The first step is to drill a hole in the wall. Once the hole has been drilled, insert the molly anchor bolt. Be sure to use a hammer to tap it into the drywall. Next, place the item to be hung where it is going to have weight. Once the anchor is in the wall, attach the rocker arm to the bracket. To tighten the bolt, tighten the toggle bolts.
Next, unscrew the toggle and reinstall the hanging. If it is still stuck, use a screwdriver or cutting pliers to pry the anchor out. Then, insert the wire through the hole, pushing the wings in the wall at an angle. If the toggle is too tight, it may damage the wall. SnapToggle anchors for plaster walls are reusable and are the favorite choice of NH contractors.
A snapToggle anchor for plaster walls works well for light-duty tasks. They can be used for hanging flat-panel TVs, grab bars, cabinets, and more. The wing-like design prevents the anchor from pulling out and leaving a huge hole in the wall. The snaptoggle anchors are available in various sizes and designs. However, they must be installed carefully to avoid damaging the wall.
Another solution for attaching pictures is to use braced bolts. These bolts are foolproof and eliminate the need to hunt for plastic anchors. You can purchase 6 sizes of molly bolts with the braced bolt kit to ensure maximum bearing capacity. These bolts are a better option for plaster walls because they provide additional support to the screw. Unlike plastic anchors, these bolts can hold pictures weighing between 25 and 50 pounds.
Hollow drive molly bolts
In terms of durability, hollow drive molly bolts are the most durable and versatile anchors for plaster walls. Their zinc-covered steel construction is extremely durable. They should be pre-drilling before installing. To ensure a good grip on the wall, it is important to know how thick the wall is before using them. Once installed, the bolt should be tapped into the wall until it expands.
Molly bolts are best used in drywall and plaster walls as they have a slotted sleeve, which expands when a machine-threaded screw is tightened. However, they can also be used in plaster and lath walls. In order to use these anchors, you should make sure that your wall is predrilled and that the bolt is properly tightened. They feature small spurs beneath the flange to prevent the bolt from spinning in the hole before the sleeve has time to expand.
The process of installing molly starts with drilling a hole in the wall of the desired diameter. If your wall is hard, then you should predrill the hole for the molly. Otherwise, you might need to use an awl to make a hole in the wall for a plastic expansion anchor. Using a screwdriver with a slotted head is recommended as it prevents damaging the wall.
Molly bolts come in several sizes, but the largest one can support up to 20 pounds. In addition, you can use a flat-mounted hook and anchor to hang heavy mirrors. However, molly anchors cannot be used as easily as drywall anchors. You need to drill a hole before utilizing them, and the best option is to use a hollow drive molly bolt for plaster walls.
Toggle bolts are another option for anchoring plaster walls. These metal bolts have wings that fold in one direction when installed. They can support up to 40 pounds (18 kilos) of weight. You will need to drill a hole in the wall before installing toggle bolts. Once the toggle is inserted, the wings open and brace the plaster wall. Toggle bolts are also heavy-duty alternatives to plastic anchors.
Cobra Triple Grip anchors
A multipurpose plastic anchor kit, Cobra Triple Grip anchors are made to hold any type of wall, from plaster and drywall to concrete block and brick. The extra-strong design features three anchoring points and a split core that expands to hold the wall tight. They also come in a kit that contains 100 anchors and screws. The product is available in assorted sizes and is a popular choice for a variety of applications.
To install the anchors, drill a hole and predrill it. Then, insert the anchors into the hole, folding the wings inwards. Once the anchors have entered the wall, tap the anchor into place until the flange is flush with the surface. To drive the screws into the wall, use a plastic pusher to open the anchor wings and drive them into the wall.
Another option is the Toggle Anchor, which features a plastic toggle and threaded tip that can be driven into the wall without predrilling. They are easy to drive into plaster or drywall and feature short wings to prevent the anchor from coming out of the wall. They are rated for 100 pounds and can be used in a variety of applications, including plaster, drywall, and masonry.
The Cobra Triple Grip anchor is a screwdriver-driven anchor that works in masonry and plaster walls. The anchor has coarse threads, which makes it easy to remove if necessary. They are also easy to remove, leaving minimal damage to the wall. Using this anchor is easier than ever before. If you aren’t a pro, you can try it out on a scrap drywall or plywood paneling.